Welding Positioner - CertiFlat DIY Turning Positioner

Would You Like Us To Assemble Your Positioner?

The Weld Positioner Kit is finally here! It is CertiFlat's newest product and 100% made in the U.S.A.

Our Welding Positioner was designed to help you take your craft to the next level without breaking the bank! This one of a kind weld positioner kit is perfect for your shop. 

We've eliminated the expensive components usually associated with traditional welding positioners, the motor and speed controller. Our welding turntable is powered by the variable speed drill you have already. This, combined with our proprietary Tab and Slot DIY Kit Construction; reduced costs by almost 75% compared to others.

Easy To Build...

Our Positioner features the following:

  • Designed and built in the U.S.A

  • Ultra-Strong 1/4" Thick A36 HRPO Prime Steel Chassis

  • 3/8" Thick Face Plate Working Surface (can be drilled, tapped & welded to)

  • Shafts are made in house out of 4140PH

  • Gears machined in the USA out of 4140PH and 1045 for long life.

  • Fit 16MM and 5/8" Tooling Holes and Tables

  • Horizontal to Vertical locations with 15° increments

  • 6" Diameter Face plate set for mounting, can mount a 3-jaw chuck

  • Working Load Limit of 385 lbs. (balanced-vertical & horizontal)

  • Turntable is Ground Path Isolated to Protect Bearings, Shafts & Bushings

  • Easy to assemble, Goof Proof Tab and Slot DIY Kit

  • Capable of developing over 1000 ft./lbs. of rotational torque with most drills

  • Velcro cinch included for setting drill to that perfect speed

We are very proud and excited about our NEW welding  positioner kit, we spent hours engineering the perfect tool for you and at a GREAT price.  The turntable unit mounts to CertiFlat tables and accepts all of our accessories for fast setups.

Guaranteed for life, this is a tool you just can't live without. The perfect complement for your CertiFlat Table and all accessories.

Unless you are making arrangements to pick up your purchase, all items require shipping.

How much is it to ship?

  • Shipping is currently flat rate and it depends on the weight. All pro tables can ship UPS to your door for a max price $99.99.
  • FabBlocks MUST ship freight, that rate is $99.99 to a commercial address or terminal or $129.99 for a residential delivery with liftgate.
  • Depending on where you live, the largest block we can put on a liftgate is 4’x8’. Some areas are limited to 90” length.

Most certiflat items are very heavy. UPS has a weight limit of 150lbs.

  • Our pro table line, and 24x36/24x48 mini blocks can be split up and ship in multiple boxes via ups.
  • The 36x48 mini block and regular fabblocks need to ship freight due to number of parts and weight.
  • Fabblocks smaller than 60" can be delivered to a residential address with a liftgate, anything larger will either need to go to a shipping terminal for you to pick up, or delivered to a commercial address with a dock/forklift.

Home based businesses and farms do not qualify for commercial status even with a forklift.

  • We will be flagged with a residential delivery and residential delivery must be purchased when adding products to your shoppinng cart.
  • The flat rate shipping offers are to the lower 48 contiguous states.
  • We also ship to alaska, puerto rico, haiwiaii, canada & mexico, contact us for a quote.

Questions?

  • Call or text us at 651.800.4877
  • Email us at Sales@weldtables.com

WHAT IS THE DIFFERENCE BETWEEN THE TABLES?

-PRO Table Tops

  • Made from HRPO A36 Steel
  • 2” tall rib support structure
  • 3/16” thick top and rib structure
  • Tab and Slot Design for easy assembly
  • Laser cut for tight tolerances
  • 16MM holes for clamps and fixtures
  • No option for expansion

-Mini-Block

  • Same material and tolerances as PRO Top
  • 4” deep rib structure and sides
  • 3 Dimensional work surfaces on 5 sides
  • Compatible with fabWings, Vise Mount, and most side mount accessories
  • Can be bolted together for near unlimited configurations!
  • Heavier duty than PRO Tops

-FabBlocks

  • Same material and tolerances as PRO’s and Mini’s
  • 6” or 8” deep rib structure (length dependent) for strength and flatness
  • Available in ¼”, 3/8” or ½” material.
  • Increased stiffness – full torsion box design.
    Available with 16MM or tapped holes. (3/8”-16 or ½”-13 thread available depending on thickness)

Note: The FabBlock and mini-block have sides with our standard hole pattern, and can be expanded by either using our fabwings or by bolting multiple blocks together. The options for sizes and configurations are essentially endless with the Mini-Block and FabBlock style tables!

WHAT LEGS DO I NEED?

  • The pro tables use one of the heavy duty leg kits.
  • Mini-Blocks, FabBlocks, and plasma tables use our FabRack.
    • The FabRacks can be purchased with or without casters.

CAN I GET A THICKER/LARGER PRO TABLE?

  • We do not offer the pro table in thicker material. Due to the rib structure design, they are limited in size (largest 3x4) and thickness.

WHY WOULD I WANT THREADED HOLES?

  • Threaded holes are very convenient for bolting your fixtures or our accessories to the table. Threaded holes are the quickest way to set things up on the table.
  • When you order threaded holes, the sides of the table will have the threaded pattern as well.
  • Pro tables are not available with threaded holes as there is not enough material. To attach accessories to the pro tables you would want to use parts FBN-2 and FBS-2, the fabnut and fabnut locating spacer washer.

DO YOU HAVE A BEGINNER PACK/ACC PACK?

  • We do have a 4-pack of squares available at a discount, parts VFS-2 and VFS-4. All other accessories are a la carte.

HOW DO THE FABNUTS/SPACERS WORK?

  • Fabnuts are threaded and have an o-ring. They insert into the 16MM hole from the underside of the table and are held in place by the o-ring.
  • The fabspacer fits in the 16MM holes on our accessories and allow you to get accurate placement with a 3/8-16 bolt.

DO YOU OFFER ASSEMBLY?

  • We do offer in house assembly by our pro welders. The cost depends on the size of table or accessory.
  • For rates contact admin@tabandslot.com

WHAT IS THE LEAD TIME?

  • It depends on our workload, currently about 4-6 weeks to ship on all tables except ProTops.
Customer Reviews
4.8 Based on 4 Reviews
5 ★
75% 
3
4 ★
25% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    LB
    06/30/2024
    Larry B.
    United States United States

    Welding positioner

    I like it a lot. It's a solid, well thought out design. I made several modifications to mine, including adding a wheelchair motor, and variable power supply. It works well. I get a steady RPM range from 1 rotation in 11 minutes, to 6 RPM.

    SG
    08/02/2023
    Steven G.
    United States United States

    Great table

    Went together smooth. Should add power ootions

    EB
    07/06/2022
    Eric B.
    United States United States

    Fast service great product

    AS
    10/28/2021
    ALAN S.
    United States United States

    Welding turntable

    Overall I am very happy with this table. But it would be nice if there was a motor drive as an option. And a three jaw chuck would be nice as well.

    CertiFlat Welding Positioner - CertiFlat DIY Turning Positioner Review
    An Item Was Added To Cart!

    Need Help? Call Us at 651.800.4877

    X